Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-200
NS Series Programming Manual
Read Data from NS to PLC Data Block
Transfers one record of data from the specified addresses in the NS to the PLC Data Block address set
in each field.
1
2
No. Item Details
1 Address Specifies the PT memory address where the one record of data is stored.
2 Record Label Selects whether or not the record label is included in the data stored at a speci-
fied communications address.
Write Data from PLC Data Block to NS
Reads the data from the PLC Data Block address set in each field to the specified NS address.
1
2

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)