Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-201
NS Series Programming Manual
No. Item Details
1 Address Specifies the PT memory address where the one record of data will be stored.
2 Record Label Specifies whether to include the record label when reading.
Read Record Label
Reads the record labels for the specified number of records in the CSV file to the specified NS ad-
dress.
1
2
3
5
4
No. Item Details
1 Record No. Specifies the record number in the CSV file (0 to 999) to use in the control op-
eration.
The record number can be set indirectly through a communications address by
selecting the Indirect Option.
2 No. of
Records to be
read
Specifies the number of record labels to be read at a time from the specified
starting record number.
3 Turn specified
address ON
when reading
the final
record
Can be selected to turn ON a specified address when the final record has been
read.
4 File Location Specifies either the NS or the Memory Card as the location of the CSV file.
The file location can be set indirectly by selecting the Indirect Option.
If the specified address is 0, the NS will be used.
If the specified address is 1, the Memory Card will be used.
5 Address Specifies the PT memory address where the record label data will be stored.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)