Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-208
NS Series Programming Manual
N
N
N
o
o
o
t
t
t
e
e
e
♦
Even if display update is stopped because the Pause function is being used, data logging will con-
tinue when Start is selected. The latest log will be displayed when the screen is updated.
♦
Graph displays of files read from the Memory Card will be cleared when screens are switched.
♦
Multifunction Object processing will be canceled in the following cases.
• If the specified data log group does not exist.
• If an object ID other than a data log graph is specified.
• If the file save or file read operation fails.
• If menu selection is canceled when Read File is selected.
Start, Stop, Delete Data Log, and Write File
Specify the data log group for the control operation.
Specifies the data log
group number.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)