Omron NS Programming Manual

Section 2 NS Series Functions 2-13 Display
2-290
NS Series Programming Manual
♦
When indirectly referencing the border, make sure the size relationships between the maximum,
minimum, and borders are correct. If the size relationships are incorrect, the level display object will
not be displayed correctly.
Background Tab Page
Sets the fill color for the background of functional objects. Refer to Background and Setting Colors
under 2-8 Common Functional Object Functions for details.
Flicker Tab Page (Extension Tab)
Makes flicker settings to make the analogue meter flicker (flash). Refer to Flicker under 2-8 Common
Functional Object Functions for details.
Frame Tab Page (Extension Tab)
Specifies the colors and sizes of the functional object frame to change the shape or color when the
button is depressed or raised. Refer to Frames under 2-8 Common Functional Object Functions for
details.
Analogue meters themselves are based on circles but the frame is drawn as a rectangle.
Control Flag Tab Page (Extension Tab)
Control flags can control the display of functional objects. Use control flags to enable display when the
contents of an address turn ON or OFF. Refer to Control Flags under 2-8 Common Functional Object
Functions for details.
Size/Position Tab Page (Extension Tab)
Displays and sets the functional object size and position. Refer to Size/Position under 2-8 Common
Functional Object Functions for details.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)