Omron NS Programming Manual

Section 2 NS Series Functions 2-14 Alarms and Events
2-315
NS Series Programming Manual
The Ladder Monitor starts.
Select an alarm or event and
start the Ladder Monitor.
The communications address
for the selected alarm or event
will be searched for
automatically.
For details, refer to 2-14-4 Searching for Alarms and Events Using the Ladder Monitor.
For information on the Ladder Monitor, refer to the NS-series Ladder Monitor Operation Manual (Cat.
No. V082).
N
N
N
o
o
o
t
t
t
e
e
e
♦
This function can be used if the NS system is version 8.0 or higher and the Ladder Monitor is ver-
sion 3.0 or higher.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)