Omron NS Programming Manual

Section 2 NS Series Functions 2-16 Broken-line Graphs
2-371
NS Series Programming Manual
Settings for Functional Object Properties
This section describes the settings in the Functional Object Properties Dialog Box for broken-line
graphs.
General: Sets the display direction and gradation lines for broken-line graphs.
Graph: Registers the start address for monitoring, the number of points, and the type of lines.
Background: Sets the base color for broken-line graphs.
Scroll bar: Sets the scroll bar size and scroll width.
Frame: Sets the frame display for broken-line graphs.
Flicker: Sets the flicker display. (See note.)
Control flag: Sets display/no display and input enabled/disabled for broken-line graphs. (See note.)
Size/position: Sets the object size and position. (See note.)
Note: These tabs are displayed when
Display Extension Tabs Option is selected.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)