Omron NS Programming Manual

Section 2 NS Series Functions 2-20 Special Functions
2-437
NS Series Programming Manual
Checking the Log
The operation log can be checked on the Operation Log (Sort by Occurrence) Screen or Operation Log
(Sort by Frequency) Screen of the System Menu.
The following methods can be used to display the Operation Log (Sort by Occurrence) Screen or Op-
eration Log (Sort by Frequency) Screen during operation.
• Switch screens in the System Menu.
• Execute a Multifunction Object for which displaying the operation log is set (display from user
screen).
Switching Screens in the System Menu
1. Select Operation Log (Sort by Occurrence) or Operation Log (Sort by Frequency) from the Special
Screen Tab Page of the System Menu.
2. The operation log can be checked.
Executing a Multifunction Object Set to Display the Operation Log
1. Create a Multifunction Object on a user screen.
2. Select Switch Screen – Display System Menu – Operation Log (Sort by Occurr.) or Operation
Log (Sort by Freq.) in the property settings of the Multifunction Object.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)