Omron NS Programming Manual

Section 3 Using PTs 3-4 Changing Numeral and Character String Display
3-14
NS Series Programming Manual
2. Set the label string for each corresponding label in the functional object property setting (Label Tab
Page).
Use the pull-down
list to switch
between labels.
3. Use the following procedure to switch label displays during PT operation.
$SW10 stores the current label number. Write a label number directly to $SW10 to switch to that
label.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)