9-14
D Braking Unit Dimensions (mm)
4-M
4
mounting hole
30 min.
100 min.
100 min.
Three lead-in wire holes (22 dia. rubber bushing)
30 min.
Top
Mounting direction
D Braking Resistor Unit (Yaskawa Electric)
3G3IV-PLKEB
The 3G3IV-PLKEB shortens deceleration time by consuming the motor’s regenerative energy by
means of a resistor. (Usage rate: 10% ED)
Note The “usage rate: 10% ED” means that 10% of the operating time in one cycle can be used for
braking (deceleration).
Specifications Chapter
9