Omron SYSDRIVE 3G3FV

3-5
S Parameter Access Level
The SYSDRIVE 3G3FV’ s has three access levels which divide the various parameters based on their
usage, as shown below. The access level restricts which parameters can be set or displayed.
Level Function
Quick-start Allows setting/reading of parameters required for test runs. (factory-set)
Basic Allows setting/reading of general-purpose parameters.
Advanced Allows setting/reading of all parameters.
Set the access level in initialize mode with parameter A1-01.
H Changing the Access Level from Quick-start to Basic
Key sequence Display Explanation
** Main Menu **
Operation
Displays operation mode.
** Main Menu **
Initialize
Displays initialize mode.
Select Language
English
Puts the Unit in initialize mode.
Access Level
Quick Start
Switches to the access level parameter.
A1-01= 2 ***
Quick Start
Displays the access level parameter setting.
A1-01= 3
Basic Level
Changes the access level setting to “BASIC.”
Entry Accepted
Writes the new parameter setting.
Access Level
Basic Level
Returns to the access level parameter display.
Preparing for Operation Chapter 3