Panasonic DP-2330

128
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
4.3.16. Abnormal Printing
START
Is the recording paper loaded
in the Paper Tray properly?
1. Adjust the Paper Width Guide.
2. Adjust the Paper Length Guide.
Is the Panasonic Toner
being used?
Yes
No
Is the recording paper size and
thickness within specification?
Yes
No
Yes
No
Replace with correct paper.
Replace with the Panasonic Toner.
Are all switches and sensors
operating properly?
Do the rollers rotate properly?
Yes
No
Are there any foreign particles
or paper pieces in the receiver
unit?
Yes
No
Remove the foreign particles or paper pieces
from the receiver unit.
1. Check all rollers, gears, drive clutches and
springs.
2. Adjust or replace any defective parts.
Adjust, clean or replace.
Yes
No
Is the receiving mechanism
operating correctly?
Yes
No
Adjust or replace any defective parts.
END