Panasonic DP-2330

Network Firmware Update Tool (LAN)
1. General
The Network Firmware Update Tool allows a Panasonic Fax/Copy machine connected via LAN (TCP/IP) to
program the Firmware Code Memory of the Unit directly. Using a PC, the firmware code is transferred to the
Firmware Code Memory of the Unit through the LAN.
1.1 Supporting OS
This application software operation has been confirmed under the following OS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Windows 98 / Me
Windows NT 4.0
Windows 2000
Windows XP
1.2 Supporting Panasonic Fax/Copier Models
A list of the compatible Panasonic Fax/Copy machines are shown below:
DP-180 / 190
DP-2310 / 3010
DP-2330 / 3030
DP-1520 / 1820
DP-3510 / 4510 / 6010
DP-3520 / 4520 / 6020
DP-3530 / 4530 / 6030
DX-600 / DX-800 (v1.31 or higher)
UF-7100 / 8000 / 8100
UF-9000
Note:
1. Depending on the country, some Panasonic models may not be available.
2. The DX-800 works only when it's firmware is Version 1.31 or higher.
.
Page 3