Panasonic DP-2330

422
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
9.11. Verifying the Configuration and Mail Account Type (SMTP or POP)
START
Is the LAN connected
to an ISP
Is this a Dialup
connection ?
Ye s
Is static IP address
available ?
No No
Is G3 Gateway
function being used ?
Ye s
No
Ye s
Is POP account
available ?
No
Ye s
Set network parameters
for SMTP receiving
Set network parameters
for POP receiving
Ye s
Is there a MX and A Record
entry for your Panasonic
Device in the DNS table ?
Is POP account
available ?
Ye s
Ye s
Set network parameters for
POP receiving and set G3
Gateway parameters for
your Panasonic Device
Ye s
No
No
No
No
DHCP Client?
Not supported
Not supported
Not supported
Ask the Network
Administrator to setup
a new POP account.
Check the host name by
using the DOS
command-line "ping"
and "nslookup".
Ask the Network
Administrator to setup a
new POP account.
Check the host name by
using the DOS
command-line "ping"
and "nslookup".
If not ready
If not ready
If not ready
Ye s
Is there a MX and A Record
entry for your Panasonic
Device in the DNS table ?
Important Notice:
The customer who supposed to operate G3 Gateway function for Panasonic models,
the total Network Security such as Anti Spam Mail protection must be aware
how the system performs sufficient security levels as designed. So you may
ask Security Policy Manager to allow relay message by changing
configuration of Massage Transfer Agent like Sendmail. Otherwise the system will
deny any relay operation.