232
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
5.2.8. Service Mode 9 (System Maintenance)
5.2.8.1. Overview
This Service Mode is used to maintain the machine. Use the following procedure for System Maintenance.
Select the "09 System Maintenance" on the Touch Panel display.
↓
Select the "01 Send RCV’D File". The display changes to the Fax Mode.
↓
Select the desired Fax number.
↓
Press "START" to send the Fax.
After the transmission, the machine returns to the Stand-by Mode.
Note:
If the File is NOT in the machine, it is not functioned.
Touch the "OK" button 3 times.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
System Maintenance Table
No. Maintenance Mode Description
01 Send RCV'D File Transfers documents from memory to another fax machine
during a fatal printer error.
To Next Page
Loading...
