200
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
19 Move Mirror To Lock a) Press the Start key to move the mirror unit to the
locked position for transporting the copier.
b) When the mirror unit is locked, the machine will
not accept any numerical key input.
Note:
The locking operation is automatically reset when
the Power switch is turned ON again.
20 TDC Check Operation Adjustment of TDC sensor.
21-46 Not Used
47 ADF Continuous Test Press START key to begin.
48 Platen Continuous Test Press START key to begin.
49-54 Not Used
F8 Mode
No. Item Remarks
To Next Page
Loading...
