Network Firmware Update Tool (LAN)
6
Specify the Firmware Code File using the
following methods.
Select an Archive File (Complete Set)
--> Step 6a1
You can select the Firmware Code Archive
File directly here.
The selected archive file will be extracted
into the local \Data folder automatically and
it is chosen as a set when the update of
multiple firmware code files are necessary.
Select a Parent File Folder (Complete Set)
--> Step 6b1
If the archive file is already extracted into
the local \Data folder, you can select the
Parent File Folder directly here.
It is chosen as a set when the update of
multiple firmware code files are necessary.
Select Independent File Folders
--> Step 6c1
If the archive file is already extracted into
the local \Data folder, you can select
independent file folders here.
Note: Files are chosen automatically in the automatic mode, so the screen of step 6 isn’t indicated.
6a1 Select an Archive File (Complete Set)
Select "Select an Archive File (Complete
Set)" and click [Browse...] button.
Page 9
To Next Page
Loading...
