53
DP-2330/3030
MAR 2005
Ver. 2.1
DP-2310/3010
(3) Install the Mirror 2 Bracket (233) Assembly.
(4) Reinstall the 2 Inner Timing Belts (202).
Note:
The Bracket must be adjusted by moving it
towards the center until it stops against the
notches in the frame.
(5) While holding each side of the Bracket against
the notch, secure the Rear Mirror Belt Lock
(238) and the Front Mirror Belt Lock (236) with
2 Screws (18).
(6) Install the Lamp Base Bracket (224) Assembly.
Note:
The Bracket must be adjusted by moving it
towards the right edge until it stops against the
notches in the frame. Make sure that the Mirror 2
Bracket Assembly is positioned in the notches in
the center of the frame.
(7) While holding each side of the Bracket against
the notch, secure the Rear Lamp Belt Lock
(228) and the Front Lamp Belt Lock (227) with
2 Red Screws (D24).
To Next Page
Loading...
