User’s Manual of WGSW-20160HP/WGSW-24040HP series
4.16.1 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed for
un-interrupt power system and power control system.
6~12 Watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation.
10~12 Watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter split the PoE 52V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
3~25 Watts
High Power PoE Splitter
High PoE Splitter split the PoE 52
V DC over the Ethernet cable into 24/12V
DC power output. It frees the device deployment from restric
power outlet locations, which eliminate
the costs for additional AC wiring
and reduces the installation time.
30 Watts
High Power Speed Dome
This state-of-the-art design is consid
erable to fit in various network
environments like traffic centers, shopping malls, railway stations,
warehouses, airports, and production facilities for the most demanding
outdoor surveillance applications- no need electrician to install AC sockets.
Since the WGSW-20160HP and WGSW-24040HP series per PoE port supports 56V DC PoE power
output, please check and assure the Powered Device’s (PD) acceptable DC power range is from 56V
DC; otherwise, it will damage the Powered Device (PD).
To Next Page
Loading...
Need help?
General