User’s Manual of WGSW-20160HP/WGSW-24040HP series
Security Switch Authentication Configuration
Description:
Show Auth configuration.
Syntax:
Security Switch Auth Configuration
Security Switch Authentication Method
Description:
Set or show Auth method. (default: Show Auth method).
Syntax:
Security Switch Auth Method [console|telnet|ssh|web] [none|local|radius|tacacs+] [enable|disable]
Parameters:
console : Settings for console
telnet : Settings for telnet
ssh : Settings for ssh
web : Settings for web
(default: Set or show the specific client authentication method)
none : Authentication disabled
local : Use local authentication
radius : Use remote RADIUS authentication
tacacs+ : Use remote TACACS+ authentication
(default: Show client authentication method)
enable : Enable local authentication if remote authentication fails
disable : Disable local authentication if remote authentication fails
(The parameter is effective when it is typed)
Default Setting:
disable
To Next Page
Loading...
Need help?
General