Planet WGSW-20160HP - Qos Port DSCP Egressremark; Qos DSCP Map

User’s Manual of WGSW-20160HP/WGSW-24040HP series
489
QoS Port DSCP EgressRemark
Description:
Set or show the port DSCP remarking mode.
Syntax:
QoS Port DSCP EgressRemark [<port_list>] [disable|enable|remap_dp_unaware|remap_dp_aware]
Parameters:
<port_list>: Port list or 'all', default: All ports
disable : Disable DSCP egress rewrite
enable : Enable DSCP egress rewrite with the value received from analyzer
remap : Rewrite DSCP in egress frame with remapped DSCP
(default: Show port DSCP egress remarking mode)
Default Setting:
disable
QoS DSCP Map
Description:
Set or show DSCP mapping table.
This table is used to map QoS class and DP level based on DSCP value.
DSCP value used to map QoS class and DPL is either translated DSCP value or incoming frame DSCP value.
Syntax:
QoS DSCP Map [<dscp_list>] [<class>] [<dpl>]
Parameters:
<dscp_list>: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
(default: Show DSCP ingress map table i.e. DSCP->(class, DPL))
<class> : QoS class (0-7)
<dpl> : Drop Precedence Level (0-3)