User’s Manual of WGSW-20160HP/WGSW-24040HP series
Security Network ACL Status
Description:
Show ACL status.
Syntax:
Security Network ACL Status [combined|static|loop_protect|dhcp|upnp|arp_inspection|ipmc|ip_source_guard|conflicts]
Parameters:
combined : Show combined status
static : Show static user configured status
loop_protect : Shows the status by Loop Protect
dhcp : Show DHCP status
upnp : Show UPnP status
arp_inspection : Show ARP Inspection status
ipmc : Show IPMC status
ip_source_guard : Show IP Source Guard status
conflicts : Show conflict status
(default : Show combined status)
Security Network ACL Port State
Description:
Set or show the ACL port state.
Syntax:
Security
Networ
k
ACL
Port S
ta
te [<port_l
ist>] [e
nable|
disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable|disable: ACL port state
Default Setting:
Enable
To Next Page
Loading...
Need help?
General