User’s Manual of WGSW-20160HP/WGSW-24040HP series
STP MSTI Port Configuration
Description:
Show the STP port instance configuration.
Syntax:
STP Msti Port Configuration [<msti>] [<stp_port_list>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all', default: All ports
Default:
auto
STP MSTI Port Cost
Description:
Set or show the STP port instance path cost.
Syntax:
STP Msti Port Cost [<msti>] [<stp_port_list>] [<path_cost>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all'. Port zero means aggregations.
<path_cost>: STP port path cost (1-200000000) or 'auto'
Default:
Auto
STP MSTI Port Priority
Description:
Set or show the STP port instance priority.
Syntax:
STP
Msti Port Priority [<
msti>] [<stp_por
t_list>] [<priority>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all'. Port zero means aggregations.
<priority> : STP port priority (0/16/32/48/.../224/240)
Default:
128
To Next Page
Loading...
Need help?
General