Planet WGSW-20160HP - STP Port Configuration; STP Port Mode; STP Port Edge

User’s Manual of WGSW-20160HP/WGSW-24040HP series
454
STP Port Configuration
Description:
Show STP Port configuration.
Syntax:
STP Port Configuration [<stp_port_list>]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [<stp_port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
disable
STP Port Edge
Description:
Set or show the STP adminEdge port parameter.
Syntax:
STP Port Edge [<stp_port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
Enable : Configure MSTP adminEdge to Edge
Disable : Configure MSTP adminEdge to Non-edge
Default:
disable