Planet WGSW-20160HP - IP Setup; IP Ping

User’s Manual of WGSW-20160HP/WGSW-24040HP series
367
IP Setup
Description:
Set or show the IP setup.
Syntax:
IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Parameters:
<ip_addr> : IP address (a.b.c.d), default: Show IP address
<ip_mask> : IP subnet mask (a.b.c.d), default: Show IP mask
<ip_router>: IP router (a.b.c.d), default: Show IP router
<vid> : VLAN ID (1-4095), default: Show VLAN ID
Default Setting:
IP Address : 192.168.0.100
IP Mask : 255.255.255.0
IP Router : 192.168.0.1
DNS Server : 0.0.0.0
VLAN ID : 1
IP Ping
Description:
Ping IP address (ICMP echo).
Syntax:
IP Ping <ip_addr_string> [(Length <ping_length>)] [(Count <ping_count>)] [(Interval <ping_interval>)]
Parameters:
<ip_addr_string>: IPv4 host address (a.b.c.d) or a host name string
length : PING Length keyword
<ping_length> : Ping ICMP data length (2-1452; Default is 56), excluding MAC, IP and ICMP headers
count : PING Count keyword
<ping_count> : Transmit ECHO_REQUEST packet count (1-60; Default is 5)
interval : PING Interval keyword
<ping_interval> : Ping interval (0-30; Default is 0)