User’s Manual of WGSW-20160HP/WGSW-24040HP series
QoS Port Policer Rate
Description:
Set or show the port policer rate.
Syntax:
QoS Port Policer Rate [<port_list>] [<rate>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<rate> : Rate in kbps or fps (100-13200000)
Default Setting:
500
QoS Port Policer Unit
Description:
Set or show the port policer unit.
Syntax:
QoS Port Pol
ic
er
Unit [<port_li
st>] [kbp
s
|
fp
s]
Parameters:
<port_list>: Port list or 'all', default: All ports
kbps : Unit is kilo bits per second
fps : Unit is frames per second
(default: Show port policer unit)
Default Setting:
kbps
To Next Page
Loading...
Need help?
General