User’s Manual of WGSW-20160HP/WGSW-24040HP series
PVLAN Lookup
Description:
Lookup Private VLAN entry.
Syntax:
PVLAN Loo
kup [<pvlan
_id>]
Parameters:
<pvlan_id>: Private VLAN ID, default: Show all PVLANs. The allowed range for a Private VLAN ID is the same as the
switch port number range.
PVLAN Isolate
Description:
Set or show the port isolation mode.
Syntax:
PVLAN Isol
ate [<port
_list>]
[enable|d
isab
le]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port isolation
disable : Disable port isolation
(default: Show port isolation port list)
Default Setting:
disable
To Next Page
Loading...
Need help?
General