Planet WGSW-20160HP - Quality of Service Command; Qos Configuration; Qos Port Classification Class

User’s Manual of WGSW-20160HP/WGSW-24040HP series
477
6.14 Quality of Service Command
QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
QoS Port Classification Class
Description:
Set or show the default QoS class.
If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured
QoS class.
Syntax:
QoS Port Classification Class [<port_list>] [<class>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<class> : QoS class (0-7)
Default Setting:
0