Planet WGSW-20160HP - LLDPMED Port Policies; LLDPMED Coordinates

User’s Manual of WGSW-20160HP/WGSW-24040HP series
472
LLDPMED Port Policies
Description:
Set or show LLDP-MED port polcies.
Syntax:
LLDPMED port policies [<port_list>] [<policy_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<policy_list>: List of policies to delete
LLDPMED Coordinates
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [<tude_type>] [<direction>] [coordinate_value]
Parameters:
<tude_type> : The tude_type parameter takes the following values:
latitude : Latitude, 0 to 90 degrees with max. 4 digits (Positive numbers are north of the equator and negative numbers
are south of the equator).
longitude: Longitude, 0 to 180 degrees with max. 4 digits (Positive values are East of the prime meridian and negative
numbers are West of the prime meridian).
altitude : Altitude, -32767 to 32767 Meters or floors with max. 4 digits.
<direction> : The direction parameter takes the following values:
North : North (Valid for latitude)
South : South (Valid for latitude)
West : West (Valid for longitude)
East : East (Valid for longitude)
Meters : Meters (Valid for altitude)
Floor : Floor (Valid for altitude)
coordinate_value: Coordinate value