Planet WGSW-20160HP - Security Network IP Source Guard Limit; Security Network IP Source Guard Entry; Security Network IP Source Guard Status

User’s Manual of WGSW-20160HP/WGSW-24040HP series
441
Security Network IP Source Guard Limit
Description:
Set or show the IP Source Guard port limitation for dynamic entries.
Syntax:
Security Network IP Source Guard limit [<port_list>] [<dynamic_entry_limit>|unlimited]
Parameters:
<port_list> : Port list or 'all', default: All ports
<dynamic_entry_limit>|unlimited: dynamic entry limit (0-2) or unlimited
Default Setting:
unlimited
Security Network IP Source Guard Entry
Description:
Add or delete IP source guard static entry.
Syntax:
Security Network IP Source Guard Entry [<port_list>] add|delete <vid> <allowed_ip> <allowed_mac>
Parameters:
<port_list> : Port list or 'all', default: All ports
add : Add new port IP source guard static entry
delete : Delete existing port IP source guard static entry
<vid> : VLAN ID (1-4095)
<allowed_ip>: IPv4 address (a.b.c.d), IP address allowed for doing IP source guard
<ip_mask> : IPv4 mask (a.b.c.d), IP mask for allowed IP address
Security Network IP Source Guard Status
Description:
Show IP source guard static and dynamic entries.
Syntax:
Security Network IP Source Guard Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports