User’s Manual of WGSW-20160HP/WGSW-24040HP series
QoS Port DSCP Translation
Description:
Set or show DSCP ingress translation mode.
If translation is enabled for a port, incoming frame DSCP value is translated and translated value is used for QoS
classification.
Syntax:
QoS Port DSCP Translation [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable DSCP ingress translation
disable : Disable DSCP ingress translation
(default: Show DSCP ingress translation mode)
Default Setting:
disable
QoS Port DSCP Classification
Description:
Set or show DSCP classification based on QoS class.
This enables per port to map new DSCP value based on QoS class.
Syntax:
QoS Port D
SCP C
lassifi
cation [<por
t_list>] [
none|zero|sele
cted|all]
Parameters:
<port_list>: Port list or 'all', default: All ports
none : No DSCP ingress classification
zero : Classify DSCP if DSCP = 0
selected : Classify DSCP for which class. mode is 'enable'
all : Classify all DSCP
(default: Show port DSCP ingress classification mode)
Default Setting:
none
To Next Page
Loading...
Need help?
General