Planet WGSW-20160HP - Qos Port Queueshaper Rate; Qos Port Queueshaper Excess

User’s Manual of WGSW-20160HP/WGSW-24040HP series
485
QoS Port QueueShaper Rate
Description:
Set or show the port QueueShaper rate.
Syntax:
QoS Port QueueShaper Rate [<port_list>] [<queue_list>] [<bit_rate>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<queue_list>: Queue list or 'all', default: All queues (0-7)
<rate> : Rate in kbps or fps (100-13200000)
Default Setting:
500
QoS Port QueueShaper Excess
Description:
Set or show the port queue excess bandwidth mode.
Syntax:
QoS Port QueueShaper Excess [<port_list>] [<queue_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list>: Queue list or 'all', default: All queues (0-7)
enable : Enable use of excess bandwidth
disable : Disable use of excess bandwidth
(default: Show port queue excess bandwidth mode)
Default Setting:
disable