User’s Manual of WGSW-20160HP/WGSW-24040HP series
QoS Port Classification Tag
Description:
Set or show if the classification is based on the PCP and DEI values in tagged frames.
Syntax:
QoS Port Classification Tag [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable tag classification
disable : Disable tag classification
(default: Show tag classification mode)
Default Setting:
disable
QoS Port Classification Map
Description:
Set or show the port classification map.
This map is used when port classification tag is enabled,and the purpose is to translate the Priority Code Point (PCP) and
Drop Eligible Indicator (DEI) from a tagged frame to QoS class and DP level.
Syntax:
QoS Port C
lassificat
ion M
ap [<port_l
ist>] [<
pcp_list>]
[<dei_list>] [
<class>] [
<dpl
>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<pcp_list> : PCP list or 'all', default: All PCPs (0-7)
<dei_list> : DEI list or 'all', default: All DEIs (0-1)
<class> : QoS class (0-7)
<dpl> : Drop Precedence Level (0-3)
To Next Page
Loading...
Need help?
General