User’s Manual of WGSW-20160HP/WGSW-24040HP series
Security Switch SNMP User Changekey
Description:
Change SNMPv3 user password.
Syntax:
Security
Switch SN
MP
User Changekey <engi
neid> <u
ser_name>
<auth_p
assword> [<priv
_password>]
Parameters:
<engineid> : Engine ID, the format may not be all zeros or all 'ff'H and is restricted to 5 - 32 octet string
<user_name> : A string identifying the user name that this entry should belong to. The name of "None" is reserved.
The allowed string length is (1-32), and the allowed content is ASCII characters from 33 to 126
<auth_password>: A string identifying the authentication pass phrase
<priv_password>: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII characters from 33 to 126
Security Switch SNMP User Lookup
Description:
Lookup SNMPv3 user entry.
Syntax:
Security Switch SNMP User Lookup [<index>]
Parameters:
<index>: entry index (1-64)
To Next Page
Loading...
Need help?
General