User’s Manual of WGSW-20160HP/WGSW-24040HP series
STP MSTI Priority
Description:
Set or show the bridge instance priority.
Syntax:
STP Msti Priority [<msti>] [<priority>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<priority> : STP bridge priority (0/4096/8192/12288/.../53248/57344/61440)
Default:
32768
STP MSTI Map
Description:
Show or clear MSTP MSTI VLAN mapping configuration.
Syntax:
STP Msti Map [<msti>] [clear]
Parameters:
<msti>: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
Clear : Clear VID to MSTI mapping
STP MSTI Add
Description:
Add a VLAN (single or range) to a MSTI.
Syntax:
STP Msti Add <msti> <vid-range>
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<vid-range>: Single VLAN ID (1-4095) or 'xx-yy' VLAN ID range
To Next Page
Loading...
Need help?
General