User’s Manual of WGSW-20160HP/WGSW-24040HP series
Voice VLAN Security
Description:
Set or show the Voice VLAN port security mode. When the function is enabled, all non-telephone MAC address in Voice
VLAN will be blocked 10 seconds.
Syntax:
Voice VLAN Security [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Voice VLAN security mode.
disable: Disable Voice VLAN security mode
(default: Show flow Voice VLAN security mode)
Default Setting:
disable
Voice VLAN Discovery Protocol
Description:
Set or show the Voice VLAN port discovery protocol mode. It only work under auto detect mode is enabled. We should
enable LLDP feature before configure discovery protocol to 'LLDP' or 'Both'. Change discovery protocol to 'OUI' or 'LLDP'
will restart auto detect process.
Syntax:
V
oice VLAN Di
scovery Pr
otocol [<p
ort_list>] [ou
i|lldp|both]
Parameters:
<port_list>: Port list or 'all', default: All ports
OUI : Detect telephony device by OUI address.
LLDP : Detect telephony device by LLDP.
Both : Both OUI and LLDP.
(default: Show Voice VLAN discovery protocol)
Default Setting:
OUI
To Next Page
Loading...
Need help?
General