User’s Manual of WGSW-20160HP/WGSW-24040HP series
QoS QCL Status
Description:
Show QCL status. This can be used to display if there is any conflict in QCE for differnet user types.
Syntax:
QoS QCL status [combined|static|voice_vlan|conflicts]
Parameters:
combined|static|voice_vlan|conflicts: combined : Shows the combined status
static : Shows the static user configured status
voice_vlan : Shows the status by Voice VLAN
conflicts : Shows all conflict status
(default : Shows the combined status)
QoS QCL Refresh
Description:
Resolve QCE conflict status. Same H/W resource is shared by multiple applications and it may not be available even
before MAX QCE entry. So user can release the resource in use by other applications and use this command to acquire
the resource.
Syntax:
QoS QCL refresh
To Next Page
Loading...
Need help?
General