© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 18
Information Display (65)
Displays the total number of strides counted since the last stride count
reset. Also displays the total number of stride count resets performed on
this machine.
Displays the total number of accumulated strides on the unit. This value
is stored on both the upper PCA in the console and on the lower PCA.
Odometer information is transferred between the upper and lower
boards when either of the boards has been changed or replaced.
Displays the total number of hours that the unit took to accumulate those
miles unit. This value is stored in the upper PCA in the console, so if that
PCA is replaced the hours of use would start again from “0”
Displays the current version of software that handles flash upgrades of
upper PCA (console) software.
Displays the current version of operating software loaded in the upper
PCA (console). This is the unit specific console software.
Displays the current version of software loaded in the lower control
module.
Displays the current version of software loaded in the Metrics board.
Displays the current version of software loaded in the Stride Dial board.
The base serial number can be set here using the WinCSAFE computer
software. Factory default is NONE.
Displays the Statistics of the workout programs used, the number of
times accessed, and duration of use.
Displays a running log of errors encountered on the unit.
To Next Page
Loading...
Need help?
General
