© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 95
the summary from happening. If the AMT is prevented from going into the summary, the stride count
will not be overwritten.
When testing is complete make sure that each PCA board is replaced in the original unit from which it
was removed. The only exception to this would be if you find a bad board that needs to be replaced.
All of these functions will place a code (70-79) in the error log, and they should be cleared before
returning the unit to use.
The following table shows the possible belt and PCA board swapping event codes.
Belt Replacement & Odometer Tracking Codes
To Next Page
Loading...
Need help?
General
