PREVOST X3-45 Multiplex - Page 1011

Section 16: SUSPENSION
PA1562
43
Valve (3 way, 2 positions)
Type ............................................................. N/C
Supplier number.......................411-C-456235W
Prévost number.......................................641357
Type .............................................................N/O
Supplier number........................411-D-456236X
Prévost number.......................................641356
Radius rod bushing
Make....................................................... Prévost
Prévost number.......................................630021
Loctite
Make.........................................................Loctite
Prévost number.......................................680039
Sway bar bushing (Front Suspension)
Make .......................................................Prévost
Prévost number ......................................630020
Sway bar link
Make ..................................Tennaco Automotive
Supplier number .....................................934400
Prévost number ......................................630230
Shock absorber bushings
Make .......................................................Monroe
Supplier number .......................................45380
Prévost number ......................................630062
Air regulator
Make ......................................................Norgren
Recommended pressure sett. . 90 psi (621 kPa)
Supplier number ......................R74G-4AT-RMN
Prévost number ......................................641352
14. TORQUE SPECIFICATIONS
1- Shock absorber pin .................................................................................... 500-550 lbf-ft (680-750 Nm)
2- Shock absorber pin nut .................................................................................... 70-80 lbf-ft (95-110 Nm)
3- Radius rod stud .................................................................................................. 20-40 lbf-ft (27-54 Nm)
4- Radius rod retaining nut or bolt .................................110-130 lbf-ft lubricated (150-175 Nm lubricated)
5- Radius rod support nut..............................................110-130 lbf-ft lubricated (150-175 Nm lubricated)
6- Axle attachment nut.................................................................................... 425-475 lbf-ft (580-645 Nm)
7- Air spring stud nut .............................................................................................. 20-25 lbf-ft (27-34 Nm)
8- Sway bar link nuts .....................................................110-130 lbf-ft lubricated (150-175 Nm lubricated)
9- Sway bar bushing collar bolts .......................................................................... 70-80 lbf-ft (95-110 Nm)
NOTE
During assembly, use “Loctite 242” (Prévost No 680038) with item 1 and 3. After assembly, apply “anti-
seize compound” (Prévost No 680064) on all threads nuts.