PREVOST X3-45 Multiplex - Changing to Another Folder on a CD - (Optional Feature); Repeating Tracks on a CD - (Optional Feature)

English 11
Repeating Tracks on a CD — (Optional Feature)
There are three possible Repeat settings for
a CD: Repeat All, Repeat track and Repeat
Folder (If the content of the CD is stored in
folders). By default, Repeat All is active.
To change the repeat setting, do the
following:
1 Push MENU(15) button.
2 Push UP (13) or DOWN (17) buttons
until “REPEAT” is displayed.
3 Push OK (14) button to enter the repeat
sub menu.
4 Push UP (13) or DOWN (17) buttons to
choose between All and Folder.
5 Push OK (14) button to enter the
desired repeat mode.
Changing to Another Folder on a CD — (Optional Feature)
If the content of the CD is stored in folders,
it is possible to change folders directly. To
do this, push either the UP (13) or DOWN
(17) button to move to the next or previous
album/folder respectively.
Scan a CD
When CD is scanned, the first 10 seconds of
each track is played.
To activate Scan, do the following:
1 Push MENU (15) button.
2 Select “SCAN” by pushing OK (14)
button.
Scanning will stop if:
1 The face plate buttons ESC (16 ) or OK
(14).
OR
2 All tracks are browsed through.