PREVOST X3-45 Multiplex - Band Selection (FM and AM); Power; Seek in Radio Mode

English 7
Main Functions
Many functions are controlled or adjusted
through the radio Menu. If the Menu screen
is open and the radio experiences no activity
for a 10 second period, the radio will cancel
any incomplete actions, close the Menu
screen and return to normal operation. The
radio will save all completed changes.
Power
Switching On & Off, Mute and Pause of the Audio System
The audio system is switched on or off by
pressing the Volume Knob (7).
If the driver wants to quickly mute the audio
system sound, press the Volume Knob (7).
Radio Mode
Band Selection (FM and AM)
To select the radio as the play mode, turn the
radio on and press the RADIO (10) button .
The radio will then be active on the last used
radio band (AM, FM etc).
To switch between the bands
(AM/FM1/FM2) use the RADIO (10)
button .
Seek in Radio Mode
There are two ways to seek for a radio
station:
1 Use the Seek buttons ESC (16 ) or OK
(14) to seek up or down respectively on
the radio. Once a station is found the
seek function will stop.
OR
2 Use the Seek buttons of the Steering
Wheel Control << (21) or >> (20) to
seek up or down respectively on the
radio. Once a station is found the seek
function will stop.
Manual Tuning
Manual Tuning can be performed in two
ways:
1 Push UP (13) or DOWN (17) buttons to
tune up or down respectively.
OR
2 Push and hold button << (21) or >>
(20) on the steering wheel, to tune up or
down respectively.