PREVOST X3-45 Multiplex User Manual

22 English
Deactivating Guard
It is possible to deactivate Guard, but not
recommended.
To deactivate the Guard function, do the
following:
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “ADVANCED” is displayed.
3 Push OK (14) button to enter the
advanced sub menu.
4 Push UP (13) or DOWN (17) buttons
until “GUARD” is displayed.
5 Push OK (14) button to enter.
6 Push OK (14) button to set Guard On
or Off.
The user will be requested for the Anti Theft
Code to deactivate or activate Guard. The
display will then show “CODE 0000” with
the first digit blinking.
To enter the code, do the following:
1 For the current (blinking) digit, turn
the Volume Knob (7) until the right
number is shown.
2 Press the power button to enter the digit.
The next digit will start to blink.
3 Repeat step 1 and 2 until all four digits
has been entered.
The user has three tries to enter the code.
If these are unsuccessful the radio will be
locked for 60 minutes until three new tries
are allowed.

PREVOST X3-45 Multiplex Specifications

General

Length	45 ft
Width	102 in
Engine	Volvo D13
Horsepower	500 hp
GVWR	54, 000 lbs
Height	146 in
Sleeping Capacity	Varies based on floor plan
Water Capacity	Varies based on floor plan