12 English
External Audio Input — (Optional Feature)
There are three possible external audio input
modes, USB, iPod and Aux. A USB and an
AUX device can be connected and accessible
at the same time. However, if an iPod is
connected the USB and the AUX devices
will be disabled as an available source.
USB Mode — (Optional Feature)
The radio is designed to work with USB
devices formatted with the USB Mass
Storage Device Class standard. Other USB
devices may still work with the radio though.
If a USB device doesn’t work properly, try
reconnecting the device which may solve the
problem in some cases.
Note: A USB device must be connected
prior to operating in this mode.
Switching to USB Mode
There are two ways to switch to USB mode.
1 Push the CD/AUX (12) button until
“USB” shows on the display.
OR
2 Connect a USB device.
Disconnecting a USB Device
No special preparations are needed to
disconnect the USB device. When USB
device is removed the radio will play the
previous audio source.
Changing a Track on USB Device
There are two ways to change a track on a
USB:
1 Push and hold the ESC (16 )or OK (14)
button on the radio to fast forward or
fast reverse respectively.
OR
2 Using the steering wheel controls: Push
and release the << (21) or >> (20)
button to move to fast reverse or fast
forward respectively.
Fast Reverse or Fast Forward on a USB Device
Fast reversing or forwarding can be
performed in one of two ways:
1 Push and hold the ESC (16 ) or OK (14)
button to fast forward or fast reverse
respectively.
OR
2 Using the steering wheel controls: Push
and release the << (21) or >> (20)
button to move to fast reverse or fast
forward respectively.
Please note that Push and hold the button
will enter the iPod menu