English 13
Playing Tracks on a USB Device in Random Order
There are two possible Random settings for
a USB device: Random All and Random
Folder (If the content of the USB device is
stored in folders).
To play tracks in random order, do the
following:
1 Push MENU(15) button.
2 Push UP (13) or DOWN (17) buttons
until “RANDOM” is displayed.
3 Push OK (14) button to enter the
random sub menu.
4 Push UP (13) or DOWN (17) buttons to
choose between All and Folder.
5 Push OK (14) button to enter the
desired random mode.
Repeating Tracks on a USB Device
There are three possible Repeat settings for
a USB device: Repeat All, Repeat track and
Repeat Folder (If the content of the USB
device is stored in folders). By default,
Repeat All is active.
To change the repeat setting, do the
following:
1 Push MENU(15) button.
2 Push UP (13) or DOWN (17) buttons
until “REPEAT” is displayed.
3 Push OK (14) button to enter the repeat
sub menu.
4 Push UP (13) or DOWN (17) buttons to
choose between All, Track and Folder.
5 Push OK (14) button to enter the
desired repeat mode.
Changing to Another Folder on a USB
If the content of the CD is stored in folders,
it is possible to change folders directly. To
do this, push either the UP (13) or DOWN
(17) button to move to the next or previous
album/folder respectively.
Scan a USB
When USB is scanned, the first 10 seconds
of each track is played.
To activate Scan, do the following:
1 Push MENU (15) button.
2 Select “SCAN” by pushing OK (14)
button.
Scanning will stop if:
1 The face plate buttons ESC (16 ) or OK
(14).
OR
2 All tracks are browsed through.
To Next Page
Loading...