PREVOST X3-45 Multiplex User Manual

8 English
Presets (Storing Radio Stations)
Up to 12 FM and 6 AM radio stations can be
stored for fast access. There are two sets of
FM radio preset bands, which are FM1 and
FM2, and one AM radio preset band. Each
preset band can store 6 stations on buttons 1
thru 6.
To store a specific station into a preset
button, do the following:
1 Push RADIO (10) button until the
required frequency band is active (AM,
FM1, FM2, FM3 (Mid radio only),
Weather, or Satellite radio (Mid radio
only)).
2 Tune the radio to the desired station.
3 Push and hold the desired preset button
1 thru 6.
4 There will be a short as the station is
stored. When audio returns the process
is completed.
Presets (Selecting a Stored Radio Station)
To select one of the preset stations, perform
the following:
1 Push the RADIO (10) button to select
the required band (AM, FM1, FM2,
FM3 (Mid radio only), Weather, or
Satellite radio (Mid radio only)).
2 Push and release the required preset
button 1 thru 6 to activate the desired
station.
Scan Mode
The scan feature allows the user to perform a
radio station search without having to toggle
manually through the stations. When in scan
mode, each station found will play for 10
seconds to give the user a chance to sample
the station program or music. The scan will
then continue on to the next available station
unless the user chooses to stop the scan and
stay at the present station.
To enter scan mode, perform the following:
1 Push MENU (15) button.
2 Select “SCAN” by pushing OK (14)
button.
To exit scan mode and stay at the present
station perform:
1 Push the RADIO (10) button.
OR
2 Push steering wheel button << (21) or
>> (20).

PREVOST X3-45 Multiplex Specifications

General

Length	45 ft
Width	102 in
Engine	Volvo D13
Horsepower	500 hp
GVWR	54, 000 lbs
Height	146 in
Sleeping Capacity	Varies based on floor plan
Water Capacity	Varies based on floor plan