EasyManuals Logo

PREVOST X3-45 Multiplex User Manual

PREVOST X3-45 Multiplex
1422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1322 background imageLoading...
Page #1322 background image
20 English
Clock
Displaying the Time
By default, the time of day is displayed only
when the ignition is ON and the radio is OFF.
The Clock can be set to show the time also
when radio is ON, by doing the following:
1 Push MENU button (15).
2 Push UP (13) or DOWN (17) buttons
until “CLOCK” is displayed.
3 Push OK (14) button to enter the clock
sub menu.
4 Push UP (13) or DOWN (17) buttons
until “VISIBLE” is displayed.
5 Push OK (14) button to change between
ON/OFF status.
12– or 24-Hour Format
The clock can be set to 12-hour or 24-hour
mode. The 12-hour mode distinguishes
between AM and PM.
To change the time format, do the following:
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “CLOCK” is displayed.
3 Push OK (14) button to enter the clock
sub menu.
4 Push UP (13) or DOWN (17) buttons
until “12/24 HR” is displayed.
5 Push OK (14) button to change between
12H or 24H options.
Setting the Clock
Normally the time is set automatically by the
trucks system. The option to manually set
the time will then not be available.
To set the clock manually, do the following:
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “CLOCK” is displayed.
3 Push OK (14) button to enter the clock
sub menu.
4 Push UP (13) or DOWN (17) buttons
until “SET TIME” is displayed.
5 Push OK (14) button to enter the set
time sub menu.
6 Push UP (13) or DOWN (17) buttons to
adjust the hours up or down respectively.
7 Push OK (14) button to set the hour and
toggle to the minute adjustment.
8 Push UP (13) or DOWN (17) buttons
to adjust the minutes up or down
respectively.
9 Push OK (14) button to save the time
and finish the process.
Turning the Alarm ON or OFF (Optional Feature)
To set turn On or Off the Alarm time, do the
following:
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “WAKE UP ALARM” is
displayed.
3 Push OK (14) button to enter the wake
up alarm sub menu.
4 Push UP (13) or DOWN (17) buttons
“On/Off” is displayed.
5 Push OK (14) button to change the
alarm status.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PREVOST X3-45 Multiplex and is the answer not in the manual?

PREVOST X3-45 Multiplex Specifications

General IconGeneral
Length45 ft
Width102 in
EngineVolvo D13
Horsepower500 hp
GVWR54, 000 lbs
Height146 in
Sleeping CapacityVaries based on floor plan
Water CapacityVaries based on floor plan

Related product manuals