PREVOST X3-45 Multiplex User Manual

18 English
Bluetooth Hands Free Phone Mode — (Optional
Feature)
The radio is designed to work with mobile
phones that support the Bluetooth Hands
Free Profile 1.5. Other Bluetooth capable
mobile phones may still work with the radio
though.
To connect a mobile phone to the radio
through Bluetooth, the following steps must
be completed on the radio:
1 Activate the Bluetooth function.
2 Add the Phone.
Note: Please note that corresponding steps
have to be taken on the mobile phone.
An added phone will be stored in a list for
quick access when connecting at another
time.
Bluetooth Activation
The purpose of this process is to make a
Bluetooth connection possible.
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “HANDS FREE” is displayed.
3 Push OK (14) button to enter the hands
free sub menu.
4 Push OK (14) button to activate
Bluetooth.
When Bluetooth is active, the display shows
the icon (45).
Adding a Phone
The purpose of this process is to make a
connection between the radio and a phone as
well as to add a phone to the radio phone list.
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “HANDS FREE” is displayed.
3 Push OK (14) button to enter the hands
free sub menu.
4 Push UP (13) or DOWN (17) buttons
until “ADD PHONE” is displayed.
5 Push OK (14) button to initiate the
phone connection.
The radio will now do a search for a blue
tooth phone. This is indicated by the icon
(45) blinking.
Note: Note that the phone must be in a
corresponding connecting state during this
process.
When a connection is established, the user
will be prompted to enter a code on the
phone. Enter code 0000 to verify connection.
Activating Another Phone
The purpose of this process is to disconnect
a present bluetooth phone and establish a
connection to another phone in the phone list.
1 Push MENU (15) button.
2 Push UP (13) or DOWN (17) buttons
until “HANDS FREE” is displayed.
3 Push OK (14) button to enter the hands
free sub menu.
4 Push UP (13) or DOWN (17) buttons
until “ChangePhName” is displayed.
5 Push OK (14) button to enter the
change phone sub menu.
6 Push UP (13) or DOWN (17) buttons
until phone name that is to be connected
is displayed.
7 Push OK (14) button to connect to the
other phone.

PREVOST X3-45 Multiplex Specifications

General

Length	45 ft
Width	102 in
Engine	Volvo D13
Horsepower	500 hp
GVWR	54, 000 lbs
Height	146 in
Sleeping Capacity	Varies based on floor plan
Water Capacity	Varies based on floor plan