Section 18: BODY
PA1562
31
• If applicable, remove plastic film at the
bottom of driver’s window.
• Remove excess of Sika underneath driver’s
window.
• Clean bottom of driver’s window using
window cleaner.
• Apply Sika Aktivator at the bottom of driver’s
window.
• Install gutter under driver’s window then
compress in order to fix double face self-
adhesive tape.
• Install 3 clamps and allow curing for 4 hours.
7.7.9 Upper Lateral Window
For the removal of upper lateral window, you will
need:
Pneumatic «Zip gun» type tool;
Razor sharp window scraper;
“Olfa” knife;
Face shield.
• From inside of vehicle, cut Sika bead around
window perimeter using a “Zip gun” while
another person hold the window from the
outside.
NOTE
Wear ear plugs during this operation.
• Then, move outside of vehicle and cut Sika
bead to free window while somebody else
hold the window from the inside.
• Carefully remove window from frame, ask
for help if needed.
• Using a razor sharp window scraper,
remove from window frame Sika bead and
double-face self adhesive tape residue.
• Remove clearance light
• Apply some water to vehicle structure to
clean surface.
• Clean inside and outside of fiberglass using
anti-silicone.
• Apply some Sika 206 G+P.
• Clean window perimeter and edges using
window cleaner.
• Apply Sika Aktivator.
To Next Page
Loading...
