ii
Manual No. 7018081-02, Rel. Jun. 1999© Copyright Isringhausen 1999
INTRODUCTION
SERVICE AND REPAIR
Proper service and repair are important to the safe, reliable operation of this
seat. Service and repair should be preformed only by responsible persons
who have been properly instructed and authorized to do so. The procedures
recommend in this manual are safe effective methods for performing service
and repair operations.
We could not possibly know, evaluate, and advise the service trade of all
conceivable ways in which service can be done or of the possible hazardous
consequences of each way. If you use a service procedure which is not
recommended, be sure that personal safety and equipment safety will not
be jeopardized.
It is the responsibility of the mechanic performing the service and repair to:
• inspect for abnormal wear and damage
• choose a repair procedure that will ensure your safety, the safety of
others, and the safe operation of the equipment
• fully inspect and test the equipment to ensure that the repair or service
has been properly performed and the equipment will function properly.
This manual describes the correct service procedures for Model 6800/348
Premium seats. The information in this manual was current at the time of
printing and is subject to change without notice or liability.
READ AND UNDERSTAND THIS MANUAL AND THE
OPERATOR'S MANUAL
Learn how to service Model 6800/348 Premium seats. Failure to do so could
result in personal injury or equipment damage. Consult your dealer if you do
not understand the instructions in this manual and/or need additional
information.
KEEP THIS MANUAL
This manual should be considered a permanent part of the seat and be
available for reference when servicing the seat.
WARRANTY
Warranty is provided as part of Isringhausen's support program for
customers who operate and maintain their seat as shown in this manual.
See the warranty for details.
MODEL 6800/338 BUS
MODEL 6800/338 PREMIUM LX
To Next Page
Loading...
