14
Manual No. 7018081-02, Rel. Jun. 1999
REMOVAL and INSTALLATION
© Copyright Isringhausen 1999
MODEL 6800/338 BUS
MODEL 6800/338 PREMIUM LX
Seat frame
Set up
• Seat cushion and backrest must
be removed from seat (see
Cushion seat pan and
Backrest)
• Shock absorber handle and
cable must be removed. (see
Adjustable shock absorber
handle and cable - handle
end)
Removal
• Mark and remove air lines
• Remove fasteners
• Remove seat frame
Installation
• Fasten seat frame to static
spacer rails with bolts and nuts
• Torque fasteners to 14.8 - 18.4
lb ft (20 - 25 N•m)
• Connect air lines
Seat frame tooth plate
Set up
• Backrest and covers must be
removed from seat (see
Backrest and Covers front, LH
and RH)
Removal
• Remove seat latch fasteners
• Remove seat latch
• Remove connecting link
Installation
• Install connecting link
• Fasten seat latch to seat frame
with screws
torque to
14.8 - 18.4 lb ft
(20 - 25 N•m)
To Next Page
Loading...
